Frequently Asked Questions

A brake service typically involves a comprehensive inspection of the braking system, including components like brake pads, rotors, calipers, and brake lines. Worn brake pads might be replaced, and if needed, rotors could be resurfaced or replaced. Brake fluid condition is checked and may be replaced, while calipers and other hardware are inspected for proper function. The service may include bleeding the brake system and conclude with a test drive to ensure the brakes are operating effectively and safely.

No, not all brakes are the same. Braking systems can vary significantly based on factors such as the type of vehicle (car, truck, motorcycle, etc.), the intended use of the vehicle (daily driving, racing, off-roading), and the manufacturer’s design choices. Different types of vehicles and their specific requirements can lead to variations in brake components, sizes, materials, and designs. Additionally, some vehicles might have advanced braking technologies like ABS (Anti-lock Braking System) or electronic brake force distribution, which further differentiate their braking systems. It’s essential to consider these variations when discussing or servicing brakes.

Brakes should generally be inspected every 19,000 to 24,000 kilometres, while brake pads might need replacement around every 40,000 to 113,000 kilometres, and brake fluid should be changed every 48,000 to 72,000 kilometres. However, specific intervals can vary based on factors like driving habits, vehicle type, and conditions, so it’s important to consult an experienced mechanic and remain attentive to any signs of brake issues for timely servicing.

The duration of a full brake service varies based on factors like vehicle type, service extent, mechanic expertise, and parts availability. Replacing brake pads might take around 1 to 2 hours, while including rotor work could extend it to 2 to 3 hours. For a comprehensive brake service involving pad and rotor replacement, brake fluid flush, and inspections, anticipate approximately 2.5 to 4 hours. Actual times can differ, and checking with your mechanic for an estimate before the service is recommended.

A standard brake service involves inspecting and maintaining key components of the braking system, including checking brake pad and rotor condition, examining calipers for proper operation, assessing brake fluid level and quality, inspecting brake lines for leaks, checking hardware components, and concluding with a test drive to ensure optimal brake function and safety. The specifics of a standard brake service can vary based on the service provider and vehicle type.

The two main types of service brakes used in vehicles are disc brakes and drum brakes.
Disc Brakes: Disc brakes are widely used in modern vehicles. They consist of a rotor (disc) attached to the wheel and a caliper that houses brake pads. When the brake pedal is pressed, the caliper clamps the brake pads onto the rotating rotor, generating friction that slows down or stops the vehicle. Disc brakes are known for their excellent stopping power, heat dissipation, and resistance to fade.
Drum Brakes: Drum brakes are an older braking technology, but they are still found in some vehicles, especially on the rear wheels. They consist of a brake drum attached to the wheel and brake shoes located inside the drum. When the brake pedal is pressed, hydraulic pressure causes the brake shoes to press against the inner surface of the drum, creating friction that slows down the vehicle. Drum brakes are generally simpler in design but may have slightly less stopping power and heat dissipation compared to disc brakes.

Both types of brakes have their advantages and disadvantages, and their effectiveness can depend on factors such as vehicle design, usage, and personal preference. Many vehicles use a combination of disc brakes on the front wheels and drum brakes on the rear wheels to achieve a balance between performance and cost.

Brisbane’s Leading Brake Service & Repair Centre

Brake Servicing

Our team of qualified Mechanics can Service your Brakes to Manufacture specifications and standards, including Brake Fluid Flushing.

Brake Repairs

We can Repair any brake issue you have with your vehicle whether it is Mechanical or Electrical – let our team of experts look after you. There is no one better, it’s a fact. Give our team a call today.

ABS Fault Specialists

We’re ABS Fault Specialists & Experts with all the factory tooling, diagnostic equipment and knowledge on all things ABS Brakes. ABS Pump failed? We can repair it with ease.

Brake Specialists

We’re Brake Specialists. We can address any brake concern you have, from noisy and spongy brakes to ABS lights on the dash and anything in between, our team can diagnose, repair and service it. Quick turnaround times and we can typically repair things even when others say it can’t be done.

Brake Tuning & Performance

Our team are specialists in their field – as such we can also carry out tuning and performance upgrades to your Brakes to enhance drivability, fix various faults and provide breath-taking performance. We have many offerings please call our team to enquire.

Brake Technical Experts

We employ a wide array of Mechanics / Technicians with many years of experience in all makes and models and over 30 years combined experience on all Car Brake Systems. Our team work on Brakes all day, every day, so we’re accustomed to the workings of these systems and procedures.

Toyota Service Brisbane



To schedule an appointment for car services with Genesis Autoworks, kindly fill out the form below and one of our team members will be in touch with you.

Brisbane’s Leading Brake Mechanic Repair Centre

Looking for your next Brake Service Brisbane? Look no further than the team at Genesis Autoworks West End. We have been Servicing and Repairing Vehicle Brakes for the last 30 years.

Whether you need Brake Pad Replacement, Brake Rotor / Disc Replacement, ABS Module Repairs, Brake Fluid Flushing, Brake Service, Brake Repair or anything related to Automotive Brakes in Brisbane, we’re your go to. 

So much growth requires a strong network of dealers & independent Mechanics to maintain your vehicle Brakes to an exceptional level – Brake engineering demands finesse and skill to maintain – who better than Genesis Autoworks for all your Mechanical & Service needs. Our team members are factory trained in all makes and models and have all the factory diagnostic equipment and knowledge to ensure your next Brake Service goes smoothly and without a hick up. 

Our workshops offer a wide range of Brake Services & Repairs at a fraction of the cost of the dealer with 3 handy Brisbane City Locations.